Hanger Studs are designed to be used with all "C" and Duck Bill ground clamps. Hanger Studs are used to hold one clamp of a set while the other is being installed on the de-energized line. Hanger Studs are not designed or tested to carry current.

21754 Grounding Clamp Hanger Stud can only be placed on clamps designed with a screw down strain relief system.

Grounding Cables are made with extra flexible strand of soft drawn #30 AWG (0.01") copper and are available in three different jackets.

The yellow thermoplastic elastomer jacketed cable is the standard for grounding service. It provides a combination of economy, flexibility, and durability. The service temperature ranges from 200 ºF to -50 ºF per ASTM F 855, Type I requirements.

The black thermoplastic elastomer jacketed cable has a smaller diameter and thinner jacket material giving it better flexibility than the yellow cable. The service temperature ranges from 200 ºF to -50 ºF per ASTM F 855, Type I requirements.

The transparent flexible thermoplastic (PVC or silicone) jacketed cable allows easy inspection for strand breakage. The flexibility decreases with low temperatures. The minimum recommended service temperature is 0 ºF per ASTM F 855, Type III requirements.

Salisbury offers a variety of single grounding assemblies. These single ground assemblies offer versatility to the user when performing temporary grounding.

For ordering convenience, completed Single Grounding Assemblies are listed which cover many standard application needs. Modification to these sets to meet specific needs can be made. 

This Single Point Distribution Grounding Set creates an equal potential zone on the working structure. This is accomplished by bonding all conductors and the structure to a ground source using individual assemblies as shown in the adjacent drawing.

Going from either the ground rod or the system ground to the pole mounted contact bar under the worker’s feet, to the assemblies bonding the conductors creates an equal potential zone.