Conventional Utility Line Hose & Connectors
(15)Conventional Style Line Hose is available in orange Type II SALCOR®. SALCOR remains flexible even in cold weather and it is not damaged by ozone or ultraviolet rays. Each line hose has Salisbury’s RIB-GRIP Locking System. The straight or connector end style is available in three sizes: 1" and 1.25" I.D. rated at 17 kV, Class 2 and 1.5" I.D. rated at 26.5 kV, Class 3.
Straight style SALCOR hose is also available in 2" or 2.5" I.D. rated at Class 3.
Conventional Line Hose Connectors are made from Type II orange SALCOR and can be used on 1", 1.25", or 1.5" I.D. conventional line hose. To connect 2" and 2.5" I.D. conventional line hose, use the SU System Connector.
Utility Line Tagging Device
The Applicator Eye Kit is used to apply a new or extra shotgun eye where needed. If a Bus or "T" guard needs to be shortened or inverted, this kit allows modifications to be made. Clear PVC pipe cement may be used to secure the eye. Directions are included.
/Asset/APPLICATORS.gif
Utility Line Insulator Covers
(9)The UH Pin-Type Cover covers insulators up to ANSI standard C29.5 Class 5. The sides are cut to be used on small insulators without resting on the crossarm. When covering a 7" diameter insulator on a double arm construction, the ends of the cover will meet flush on 10.5" pin centers.
The LRG SU System Pin-Type Cover fits insulators 10.5" (267 mm) in diameter and is used with 2.5" (64 mm) Class 4 Extended Lip SU System Line Hose. Always use clamp pins to secure the device into position. Pinning rings have been placed on the cover’s arms to prevent separation.
Post-Type Insulator Covers interlock with 1.5" (38 mm) Class 4 Extended Lip SU System or Conventional Line Hose. The PTHS for insulators up to 12" (305 mm) and the PTHL for insulators up to 16" (406 mm) in height. The PTHL cover also has external ribs on the ears which secures 2.5" (64 mm) I.D. line hose. Always use clamp pins to secure the device into position.
The Class 4 MRG Universal Cover covers pin-type insulators through 8.5" (216 mm) diameter and 13.8 kV post-type insulators. A trim bead permits use on both 35 kV and 15 kV crossarm construction.
The USC Stirrup Cover is a lightweight cover that can be installed using rubber gloves or a hot stick. The USC also feature RIB-GRIP construction and is meant to be used with Extended Lip SU Systems or Conventional Line Hose.
All covers are made from orange SALCOR® and feature RIB-GRIP® Construction. They can be installed with a hot stick or rubber gloves. All covers comply with ASTM D1049 specifications.
